Closed-combustion fireplaces with glazed viewing doors, controlled combustion air and a professionally matched flue. KALM delivers and installs nationwide across Zimbabwe.
Explore fireplaces
Prices are shown in US dollars for the fireplace only. Your compatible flue system and professional installation are specified and quoted after a site assessment.
Request a complete quotationRoom images are visualisations, not installation drawings or evidence of completed installations. Hearths, flue routes and distances to furniture, curtains, timber and stored fuel must be specified for the exact appliance. Confirm the product specification before ordering.
A compact, grounded fireplace with a generous flame view for more intimate living spaces.
Classic cast-iron character, an arched flame view and a refined footprint for warm, considered rooms.
A distinctive front-and-side flame view that gives the fire presence from more than one angle.
A broad rectangular flame picture and strong, balanced proportions for generous living areas.
Traditional cast-iron detailing and an expansive arched flame view for rooms with timeless character.
A substantial wide-body fireplace with commanding proportions and a generous flame panorama.
A broad freestanding convection fireplace with a wide flame window and open log-store base, bringing substantial heat and practical wood storage into one disciplined architectural form.
A compact steel fireplace with a clean square flame view, secondary combustion and an efficient footprint for smaller living spaces.
A balanced compact fireplace with a generous viewing window, secondary combustion and a confident contemporary silhouette.
A slim vertical fireplace with secondary air supply and a top heating plate, bringing strong presence without demanding a wide footprint.
A broad freestanding fireplace with a wide flame picture and a substantial 5 mm steel body for generous family living areas.
Three-sided glazing makes the fire an architectural focal point from more than one direction.
A wide landscape firebox offered with three lower-body treatments, each creating a strong architectural focal point.
A wide built-in fireplace cassette that can integrate into a new masonry surround or replace an open fire inside a suitable existing chimney.
A cylindrical statement fireplace with sweeping curved glazing and an open integrated log store.
A high-output curved flame view with a smooth closed lower body for a quieter architectural finish.
The glazed door closes against a perimeter rope seal. With dry fuel, correct operation and a properly specified flue, combustion gases are drawn out of the room instead of spilling from an open hearth.
The latch compresses the perimeter seal around the viewing glass, helping the firebox manage its combustion air through the designed inlets.
The closed door separates the combustion chamber from the living space during normal operation.
The viewing panel gives a direct flame view without operating the fireplace as an open fire.
Diameter, height, bends and termination are specified together so smoke and combustion gases can discharge safely outdoors.
We inspect the fireplace position, ceiling, roof, wall construction and any existing chimney before confirming the route. KALM supplies and installs nationwide across Zimbabwe.
Route illustrations explain the concept only. They do not establish installation dimensions or approval. The exact fireplace and flue manuals, site assessment and applicable local requirements govern the finished installation.
A compatible insulated chimney can pass through an assessed wall penetration and rise externally on specified supports. The wall construction, clearances, cleaning access and terminal position must be checked for the selected system.
Only a suitable, assessed masonry recess can accommodate a freestanding fireplace. The short visible connector continues into a compatible chimney liner behind the lintel. Hearth, ventilation, cleaning access and clearances to the surround must follow the appliance and flue instructions.
A cassette requires its specified non-combustible enclosure, ventilation and service access. We assess the opening and chimney, then specify the compatible liner and clearances before confirming a retrofit.
Tell us about your room, ceiling, roof and preferred flue finish. We will prepare the matched system around your chosen fireplace.
Start your enquiryExplore the decisions behind a fireplace quotation in Harare or elsewhere in Zimbabwe.
A freestanding wood-burning stove sits on a suitable hearth with a matched flue. A built-in fireplace or cassette needs a suitable non-combustible enclosure and ventilation. We assess the room and existing chimney before recommending either.
The displayed price is for the fireplace alone. Flue length and route, roof or wall work, hearth, delivery and installation depend on the property. Send photos and measurements for an initial discussion; a final quotation follows an assessment.
Sometimes. We check the opening, masonry, chimney condition, clearances, ventilation and access for cleaning. An unsuitable opening needs a different location or a properly designed retrofit.
Yes. KALM Flames handles fireplace and matched chimney enquiries across Zimbabwe. The site location and travel requirements are included in the installation proposal.
